Plastic Packaging Industry News | Wet Wipes Lid Trends & Updates | Dongyang

News
News
How to Choose the Right Wet Wipes Lid?
How to Choose the Right Wet Wipes Lid?
Selecting the right Wet Wipes Lid is a critical decision for wet wipes manufacturers, private label brands, packaging buyers, and procurement managers. A lid may seem like a small component, but it directly affects product freshness, sealing performance, user experience, and brand perception.

Sep.24 ,2026

Wet Wipes Lid Design for One-Hand Opening and Closing

Sep.21 ,2026

Wet Wipes Lid Design for One-Hand Opening and Closing
Plastic wet wipes lid wholesale buyers need a package that opens and closes with one hand without drying the wipes. A reliable flip-top closure supports moisture retention and reduces product waste. Many parents, drivers, nurses, and factory workers cannot use both hands when they need a wipe. A poorly designed snap lid can be hard to lift, break after repeated use, or stay partly open. The right
Read More
Color Matching Standards for Custom Plastic Wet Wipes Lids

Sep.21 ,2026

Color Matching Standards for Custom Plastic Wet Wipes Lids
Color mismatch is one of the most common quality problems in custom plastic wet wipes lids. Buyers want the lid, wipes pack, and brand artwork to look consistent on the shelf. A practical color control plan should combine Pantone color matching, CMYK artwork review, and Delta E testing. Dongyang recommends setting a written color tolerance before mass production, with a common target of Delta E 2
Read More
Custom Shape vs Standard Shape Wet Wipes Lids: Cost and Application Differences

Sep.18 ,2026

Custom Shape vs Standard Shape Wet Wipes Lids: Cost and Application Differences
Plastic Wet Wipes Lid Wholesale buyers usually compare custom and standard lids when they need a balance between packaging cost, product protection, brand recognition, and production speed. The right choice depends on more than the lid price. Shape, mold investment, sealing performance, filling-line compatibility, minimum order quantity, and the intended retail market can all change the final
Read More
Wet Wipes Lid Positioning Accuracy in High-Speed Packaging Production

Sep.18 ,2026

Wet Wipes Lid Positioning Accuracy in High-Speed Packaging Production
Wet wipes lid positioning accuracy is a key quality factor in modern packaging lines. A high-speed packaging machine must place each plastic lid on the same center point. Lid placement accuracy, vision inspection, and servo control are three important LSI terms for this process.
Read More
What Lid Sizes Are Commonly Used for Different Wet Wipes Packages?

Sep.18 ,2026

What Lid Sizes Are Commonly Used for Different Wet Wipes Packages?
Plastic wet wipes lids control product freshness, user convenience, and packaging cost. For brands searching for a plastic wet wipes lid wholesale supplier, the correct closure must match the wipe pack, film, adhesive, filling line, and target market. A lid that looks suitable may still leak, crack, or allow moisture loss during transport. This guide explains how to choose, test, order, and
Read More
Common Injection Molding Defects in Plastic Wet Wipes Lids

Sep.17 ,2026

Common Injection Molding Defects in Plastic Wet Wipes Lids
Plastic Wet Wipes Lid Wholesale buyers need lids that open smoothly, close tightly, and protect the wipes from drying out. However, poor mold design or unstable injection molding can cause leaks, weak hinges, rough edges, and poor appearance. Common defects include sink marks, weld lines, and short shots.
Read More